Why Is My Altec Lansing Speaker Not Charging and How to Fix It

Is your Altec Lansing speaker not charging and you’re wondering why?

You’re in the right place to find answers and get back to your music.

Here’s what we’ll cover:

  • Easy fixes for when your speaker won’t charge.
  • Quick DIY tips to get your tunes playing again.
  • Simple ways to keep your speaker working great.
why is my altec lansing speaker not charging

Join us as we tackle these issues with some easy steps.

We’ll help you fix your speaker fast so you can enjoy your music without any more hiccups.

Let’s get started!

Common Causes and Fixes

Common Causes and Fixes

Having encountered the frustrating issue of an Altec Lansing speaker not charging firsthand, I’ve delved deep into troubleshooting and have compiled a list of common causes and fixes that might save you from silence. These insights are drawn from my extensive experience with various Altec Lansing models and a thorough understanding of portable audio technology.

Faulty Charging Cable or Adapter

One of the most straightforward issues could be a faulty charging cable or adapter. It’s easy to overlook, but cables and adapters undergo wear and tear or can suddenly fail.I’ve found that replacing the cable or adapter often instantly resolves the charging issue.

Use an alternate cable and adapter compatible with your speaker and check if the issue persists. This simple swap can be the quick fix you need.

Dirty or Damaged Charging Port

Another culprit could be a dirty or damaged charging port. Dust, lint, and debris can accumulate in the port, obstructing the connection.

I recommend inspecting the charging port closely using a flashlight. If you notice any debris, gently clean it out with a dry, soft-bristled brush or a can of compressed air.

Be cautious to avoid damaging the port internals. A clean port ensures a good connection and can often restore charging functionality.

Software Glitch

Software glitches can also prevent your speaker from charging correctly. In my experience, resetting the speaker to factory settings can work wonders.

To reset your Altec Lansing speaker, press and hold both the volume up and volume down buttons located on top of the speaker for 5-7 seconds until you see the indicator light blink, signaling a reset. This process can vary slightly between models.

Faulty Battery

Over time, the speaker’s battery may degrade, leading to charging issues. Battery issues are more common in older devices but can also occur in newer ones under certain conditions.

If your speaker holds less charge over time or won’t charge at all, the battery might be the problem.

Replacement options vary; some Altec Lansing speakers have user-replaceable batteries, while others require professional service. Consider the cost and feasibility of battery replacement versus purchasing a new speaker.

Contacting Support

If you’ve tried these steps and your Altec Lansing speaker won’t charge, I recommend contacting Altec Lansing support.

Their team can offer additional troubleshooting steps, service, or replacement options.

Providing details of the steps you’ve already taken will help them assist you more efficiently.

DIY Troubleshooting Steps

When my Altec Lansing speaker wouldn’t charge, I discovered that sometimes the simplest steps are the most effective. Here are some DIY troubleshooting steps based on my firsthand experience:

Power Off Before Charging

One fundamental yet often overlooked step is the importance of turning the speaker off before charging. I’ve found that some Altec Lansing models respond better to charging when they are completely powered down, allowing for a more stable charging connection.

This can also reset any temporary software states that might be hindering charging. Always ensure your speaker is off and give it a few seconds before connecting it to the charger.

Trying Different Power Sources

If you’re facing charging issues, trying different power sources can be a game-changer. Initially, I used to charge my devices via a power strip for convenience.

However, after experiencing intermittent charging, switching to a direct wall outlet significantly improved the charging reliability.

Power strips can sometimes deliver fluctuating power or may not supply adequate power for optimal charging. Test different outlets to rule out power source issues.

Charging Time

Patience is key when it comes to charging. I recommend letting the speaker charge for at least 30 minutes before use. It’s tempting to check if the speaker has started charging immediately after plugging it in, but giving it some time can make a difference.

Some models have a threshold before showing signs of charging, especially if the battery was completely drained. Allow ample time for the speaker to revive.

Factory Reset

A factory reset can be a powerful step in resolving charging issues by returning the speaker to its original settings, potentially clearing any errors hindering the charging process.

Performing a factory reset has helped me resolve not just charging issues but also other glitches with my Altec Lansing Bluetooth speaker not charging. It’s a crucial step in troubleshooting and can often restore functionality when other methods fail.

Additional Speaker Issues and Fixes

Additional Speaker Issues and Fixes

In my journey with Altec Lansing speakers, I’ve encountered various issues beyond charging problems. Here are some practical fixes based on my experience:

Speaker Won’t Power On

When my speaker wouldn’t power on, I checked three crucial elements: the battery, power adapter, and power button. A depleted battery is the most common culprit, so ensure your speaker is charged.

If there’s no response, test the power adapter with another device to confirm it’s working. Sometimes, the power button may be stuck or malfunctioning; a gentle wiggle can sometimes free it up.

Trouble Pairing Devices

First-time pairing can be straightforward, but ensure your speaker is in pairing mode by holding down the pairing button until you see the flashing light. For continuous connection issues, forget the speaker in your device’s Bluetooth settings and restart the pairing process.

Keeping both devices within a few feet of each other during pairing can also improve connectivity.

No Audio Playing

If there’s no audio playing, start by checking the volume on both the speaker and the audio source. It’s easy to overlook a muted device or a volume level set to zero.

Next, confirm the correct audio source is selected. If your speaker is connected to multiple devices, it might be receiving audio from a different source than intended.

Weak Bluetooth Connection

For a weak Bluetooth connection, eliminate physical barriers between the speaker and the device. Walls, furniture, and other obstacles can significantly reduce signal strength.

Additionally, other wireless devices can interfere with Bluetooth signals, so try turning off other Bluetooth devices in the vicinity to see if the connection improves.

Device Out of Pairing Range

Bluetooth speakers have a limited range; ensuring optimal distance for pairing is key. Most speakers work best within 30 feet of the audio source.

If you experience frequent disconnections, bring the speaker closer to your device to maintain a stable connection.

Volume Issues

Adjusting the speaker volume correctly can sometimes be tricky, especially if your speaker and device volumes are controlled independently.

I found that setting the device (phone, tablet, etc.) to about 75% volume and then adjusting the speaker volume directly offers the best control for achieving the desired sound level.

Identifying a Faulty Speaker

Signs that the speaker itself may be the issue include consistent performance problems across various devices, persistent audio distortion at moderate volumes, or the speaker failing to power on despite a confirmed charge. In these cases, the speaker may require professional repair or replacement.

Maintenance Tips to Prevent Charging Issues

Through my journey with various portable speakers, I’ve learned that regular maintenance practices are essential for longevity and optimal performance, especially when it comes to charging. Here are some tips based on my personal experience:

Regular Maintenance Practices

Keep the Charging Port Clean: Dust and debris can easily accumulate in the charging port, leading to connectivity issues. Use a soft, dry brush or a can of compressed air to gently clean the port every few months or more frequently if used in dusty environments.

Use the Correct Charger: Always use the charger that came with your speaker or one that matches its specifications. Using an incorrect charger can harm the battery over time, potentially leading to charging issues.

Avoid Overcharging: Keeping your speaker plugged in continuously, even after it’s fully charged, can reduce battery lifespan. To maintain battery health, unplug the speaker once it’s charged and try not to leave it charging overnight.

Monitor Battery Levels: Letting the battery fully deplete before recharging can also degrade its performance over time. Try to keep the battery level between 20% and 80% for optimal longevity.

Firmware Updates: Manufacturers often release firmware updates that can improve battery management and fix known charging issues. Regularly check for and install any updates for your speaker.

Storing Your Speaker

How you store your speaker when not in use can significantly impact its battery life and overall health. Here are some guidelines:

Proper Charge Before Storage: If you plan not to use your speaker for an extended period, charge it to about 50% before storing. A fully charged or fully depleted battery can degrade faster when not in use.

Cool, Dry Place: Store your speaker in a cool, dry place away from direct sunlight or extreme temperatures. Excessive heat or cold can damage the battery and other components.

Recharge Periodically: If you’re storing the speaker for a long time, it’s a good idea to take it out and recharge it to around 50% every three to six months to maintain battery health.

Protective Case: If available, use a protective case or bag to prevent dust accumulation and protect the speaker from accidental drops or scratches during storage.

Avoid Pressure: Store your speaker in a place where it won’t be subjected to heavy objects being placed on top of it, as this can damage the internal components and the exterior casing.


How to Charge Altec Lansing Bluetooth Speaker?

  1. Connect the Charger: Use the USB cable that came with your speaker to connect it to a power source. If using a wall charger, ensure it’s compatible with your speaker’s charging requirements.
  2. Plug In Your Speaker: Insert the smaller end of the USB cable into the charging port on your Altec Lansing Bluetooth speaker.
  3. Start Charging: Plug the other end of the USB cable into a USB charger or a computer’s USB port. Your speaker should begin charging immediately.
  4. Check the Indicator: Most models have a light indicator that shows when the speaker is charging.

Why Altec Lansing Speakers Not Working?

Altec Lansing speakers may not work due to a variety of reasons, including battery depletion, connection issues, or faulty hardware. Ensure your speaker is charged, check if the Bluetooth pairing is correct, and verify that there are no obstructions between your speaker and the device. If problems persist, consider resetting your speaker or contacting customer support.

How Do I Know If My Altec Lansing Speaker is Charging?

You can tell your Altec Lansing speaker is charging by looking for a light indicator, which is usually located near the charging port. This light typically glows, blinks, or changes color when the speaker is charging.

How Long Does an Altec Lansing Speaker Battery Last?

The battery life of an Altec Lansing speaker varies by model but generally lasts between 10 to 20 hours on a full charge, depending on volume levels and usage patterns. To maximize battery life, keep the speaker at moderate volume levels and turn it off when not in use.

Why is My Altec Lansing Charging but Not Turning On?

If your Altec Lansing speaker is charging but not turning on, it might be due to a software glitch or battery issue. Try resetting your speaker. If this doesn’t work, the speaker might have a deeper technical issue and may need professional repair.

How Long Does Altec Speaker Take to Charge?

An Altec Lansing speaker typically takes about 3 to 5 hours to charge fully from a depleted state. This duration can vary depending on the model and the power source. For the most efficient charging, use the USB cable provided with your speaker and an appropriate power adapter.


We hope this guide helps solve the mystery of ‘why is my Altec Lansing speaker not charging.’ But there’s more!

On our website, you can find easy guides and reviews about all kinds of speakers and headphones. It’s perfect for anyone who loves music and wants to learn more about getting the best sound. Check it out and keep enjoying great music without the hassle!

Leave a Comment