Ever found yourself tapping your JLab earbuds, hoping they’ll magically start working again?
Whether it’s stubborn connection issues or just plain silence when you’re craving your favorite tunes, we’ve all been there.
Wondering how to reset JLab earbuds to get back to what matters most—your music, podcasts, and calls? You’re in the right place!
In this guide, we’ll walk you through the simplest way to give your earbuds a fresh start.
No tech jargon or complicated steps—just easy, straightforward advice to get your earbuds back in sync with your life.
Whether you’re a tech newbie or just looking for a quick fix, let’s dive into how you can reset your JLab earbuds and make the most out of your audio experience.
Ready to get your groove back? Keep reading!
Why Reset Your JLab Earbuds?
Resetting JLab earbuds might seem like a step you’d only take when things go wrong. However, it’s actually a handy solution for several situations that can enhance your listening experience. Let’s talk about why and when a reset could be your go-to move.
Pairing Problems
Ever tried to listen to your favorite tunes or catch up on a podcast only to find your earbuds won’t connect to your phone or laptop? It’s frustrating, isn’t it? Pairing issues are the top reason people reset their earbuds. Maybe your earbuds used to connect smoothly but now they’re being stubborn. A reset can often make them behave and connect easily again.
Audio Glitches
Music that cuts in and out, sound that’s only coming from one earbud, or a persistent buzzing noise can really ruin your groove. These audio glitches are like the hiccups for earbuds – annoying but usually not serious. Resetting your JLab earbuds can clear these up, giving you crisp and clear sound again.
Forgotten Connections
Here’s a scenario: you want to connect your earbuds to your new phone, but they’re still loyal to your old one. Or maybe they’ve connected to your friend’s device, and now they won’t switch back. Resetting breaks all previous connections, making your earbuds ready to pair with the device you want, right now.
Fresh Start
Think of resetting as giving your earbuds a fresh start. It clears any minor bugs or settings that might have gotten mixed up while you were using them. It’s like tidying up your room so you can find everything again – but for your earbuds.
When to Consider a Reset?
Before important calls or meetings: Ensure they’re working perfectly and won’t drop the connection when you need them most.
After updates: If you’ve updated your phone or earbuds’ firmware and things seem off, a reset can help them adjust to the changes.
When switching devices: If you’re moving from using them with your tablet to your phone, or to another device, resetting can make the switch smoother.
Preparing to Reset Your JLab Earbuds
Before you dive into JLab earbuds reset, there’s a little prep work to do. This isn’t just busywork—it’s about making sure the reset goes smoothly and actually fixes what’s bugging you. Here’s what you need to know to get your earbuds ready for a reset.
Charge Your Earbuds and Case
Imagine deciding to factory reset JLab earbuds, only to find they don’t have enough battery life to go through the process. Annoying, right? That’s why your first step should always be to charge both your earbuds and the charging case. Here’s why this is important:
Full Battery Means No Interruptions: A full charge ensures that your earbuds won’t power down mid-reset. It’s like making sure you have enough gas in the car before a long trip.
Ensures Effective Reset: Sometimes, a low battery can mess with the earbuds’ ability to properly reset. Charging up gives them the energy they need to follow through on your command.
So, plug in your charging case, nestle your earbuds inside, and let them charge until they’re full. Most JLab earbuds have indicators to show when they’re fully charged, so keep an eye out for that.
Making Sure Your Earbuds Are Ready for a Reset
Once everything’s charged, you’re almost ready to hit that reset button. But first, ensure your earbuds are actually ready for the reset. Here’s how:
Check Connection: Quickly check if your earbuds are still connected to any device. If they are, disconnect them. This ensures that the reset process isn’t interrupted by any incoming signals.
Inspect the Earbuds: Take a moment to visually inspect each earbud and the charging case. Make sure there’s no dirt or debris on the charging contacts. A clean contact means a better connection to the case, which is crucial for the reset.
Firmware Updates: If your earbuds were acting up due to outdated firmware, make sure you’ve updated them to the latest version before the reset. This isn’t always necessary for a reset, but it’s a good practice to keep everything up to date.
How to Reset JLab Go Air Sport and JLab Epic Air Sport Earbuds
Resetting your JLab Go Air Sport or JLab Epic Air earbuds can often solve connectivity or performance issues you may be encountering. Whether you’re looking to pair your earbuds with a new device or troubleshooting, a factory reset can be a quick fix. Below is a detailed, step-by-step guide on how to reset JLab Go Air Sport/JLab Epic Air Sport earbuds. Please follow these instructions carefully to ensure the reset process is completed successfully.
Step 1: Prepare the Earbuds
Start with your earbuds in their charging case. Ensure the case is closed before proceeding to the next step.
Step 2: Open the Case
Gently open the charging case. This action primes the earbuds for the reset process.
Step 3: Initiate the Reset Sequence
Locate the touch sensor on each earbud. You will be interacting with these sensors to reset your earbuds.
Tap the touch sensor on one of the earbuds seven times. Be deliberate with your taps to ensure the earbud registers each one. When done correctly, you should observe the earbud’s LED light blinking blue four times. Note that the light may be dim, so watch closely.
Repeat this tapping sequence on the other earbud. Again, count seven taps and look for the blinking blue light to confirm the reset command has been received.
Step 4: Confirm the Reset
After tapping both earbuds, take a moment to ensure that each earbud’s LED light has blinked blue, indicating a successful reset. If you do not see the blinking light on either earbud, repeat the seven-tap sequence for that earbud.
Step 5: Finalize the Reset
Remove the earbuds from the charging case. They should now enter pairing mode automatically, indicated by one of the earbuds blinking in a blue and white pattern.
At this point, your earbuds are reset and ready to be paired with your device.
Step 6: Re-Pair Your Earbuds
On your device (e.g., iPhone or Android phone), navigate to the Bluetooth settings.
If your earbuds were previously connected, you might need to select “Forget Device” (iOS) or “Unpair” (Android) to remove them from your device’s memory.
With Bluetooth enabled on your device, your JLab Go Air Sport/ JLab Epic Air Sport earbuds should appear in the list of available devices. Select them to pair.
How to Reset JLab Go Air Earbuds
Step 1: Preparation
Keep your JLab Go Air earbuds in their charging case throughout this process. Ensure they are correctly placed and the case is charged.
Step 2: Forget the Earbuds from Your Device
On your smartphone or device, open the Bluetooth settings.
Find “JLab GO Air True Wireless” in your list of paired devices and select the option to “Forget” or “Unpair” this device.
This step is crucial as it clears the previous connection settings, making it easier for your earbuds to connect freshly post-reset.
Step 3: Initiate the Reset on the Earbuds
With the earbuds still in the charging case, quickly tap the touch sensor on one earbud seven times. You should observe the earbud’s LED light flashing blue four times, indicating that the earbud has received the reset command.
Repeat this tapping sequence on the other earbud, ensuring that its LED light also blinks blue four times. This action confirms that both earbuds are resetting.
Step 4: Finalize the Reset
Now, take both earbuds out of the charging case. You will notice one earbud emitting a solid white light, while the other blinks in a blue and white pattern. This indicates that the earbuds are in pairing mode and ready to connect to your device.
Step 5: Re-Pair Your Earbuds
Turn on the Bluetooth on your smartphone or device. The JLab Go Air earbuds should appear in the list of available devices for pairing. If they don’t show up immediately, ensure Bluetooth is activated on your device and search again.
Once the JLab Go Air appears, select it to pair with your device. You should receive an audio confirmation from the earbuds saying “Bluetooth Connected,” along with a battery status update.
How to Reset JLab Go Air Pop Earbuds
Step 1: Start with the Basics
Ensure your JLab Go Air Pop earbuds are placed inside the charging case. This is the initial step for the reset process. The indicator lights on the earbuds may either flash blue or be off at this stage.
Step 2: Unpair from Devices
The next critical step is to disconnect or unpair the JLab Go Air Pop earbuds from any devices they are currently connected with. Navigate to the Bluetooth settings on your device and select the option to forget or unpair the earbuds.
Step 3: Open the Charging Case
Carefully open the lid of the charging case. This action is essential as it prepares the earbuds for the reset process. You will feel the magnetic force as you open and close the case, which secures the earbuds inside.
Step 4: Check the Indicator Lights
Observe the indicator lights on each earbud. They should be flashing blue. If not, gently remove and then re-insert the earbud into the charging case until you see the blue flashing light. This ensures the earbuds are correctly positioned and ready for the next step.
Step 5: Press the Button on Each Earbud
Locate the button on each earbud. Press this button seven times rapidly on one earbud. You should see the indicator light blink blue four times, signaling that the reset command has been accepted.
Repeat this process on the second earbud, ensuring its indicator light also blinks blue four times. The charging case light may turn on or flash red during this step, which is normal.
Step 6: Finalize the Reset
Remove the earbuds from the charging case. At this point, you may notice the indicator lights on the earbuds flash white and blue as they attempt to connect to each other. Once the connection is established, one earbud will show a solid white light, while the other will flash white and blue, indicating they are ready to be paired with your device.
Step 7: Pair with Your Device
Turn on Bluetooth on your device and search for the JLab Go Air Pop earbuds in the list of available devices. Select them to pair. You should hear a confirmation sound or voice prompt indicating a successful connection.
How to Reset JLab JBuds Air Pro Earbuds
Step 1: Preparatory Steps
Begin by ensuring your JLab JBuds Air Pro earbuds are placed inside their charging case. This step is crucial for the reset process to work effectively.
Step 2: Forget the Earbuds from Your Device
- On your smartphone or tablet, navigate to the Bluetooth settings.
- Locate “JLab JBuds Air Pro” in the list of paired devices.
- Select this device and choose to “Forget” or “Unpair” it.
- This action is essential for clearing any previous connection profiles from your device, making the earbuds ready for a new connection post-reset.
Step 3: Initiating the Reset Process
- With the earbuds still in their charging case, proceed to quickly tap the touch sensor on one earbud seven times.
- This action should prompt the earbud to blink blue four times, signaling that it has received the reset command.
- Perform the same seven-tap sequence on the second earbud.
- Again, you should see the LED light blink blue four times, indicating that the reset command has been successfully registered.
Step 4: Completing the Reset
After successfully tapping both earbuds, remove them from the charging case. You will notice that one earbud displays a solid white light, while the other blinks in a blue and white pattern. This lighting sequence indicates that the earbuds have been reset and are now in pairing mode, ready to be connected to your device.
Step 5: Reconnecting the Earbuds
Activate Bluetooth on your smartphone or device. Search for available devices, and the JLab JBuds Air Pro should appear on the list. If they do not appear immediately, ensure your device’s Bluetooth is on and scan again.
Select the JLab JBuds Air Pro from the list to pair. You should hear an audio confirmation from the earbuds, such as “Bluetooth Connected,” along with a notification of the battery level.
Troubleshooting After Reset
Resetting your JLab earbuds can feel like a magic fix, but what if the magic doesn’t happen? If you’ve followed the reset steps and your earbuds still aren’t behaving, it’s not the end of the road. Here are some steps to take before waving the white flag.
Double-Check the Pairing
After a reset, your earbuds are like new acquaintances to your device—they need a proper introduction. Make sure you’ve gone through the pairing process correctly:
Open your device’s Bluetooth settings and look for your JLab earbuds in the list of available devices.
If they don’t show up right away, put the earbuds back into pairing mode by taking them out of the case and holding down the touch sensors until the LED indicators flash white and blue.
Select your earbuds from the list to connect. Sometimes, it might take a couple of tries for a successful handshake between the devices.
Test Different Audio Sources
If the pairing seemed successful but you’re still facing audio issues, test your earbuds with different audio sources or apps. This can help determine if the problem is with the earbuds or the specific audio source.
Check for Firmware Updates
Even after a reset, your earbuds might need the latest firmware update to function properly. Check the JLab website or the app associated with your earbuds for any updates. An update could provide the fix you need.
When to Contact JLab Support for Further Assistance
Sometimes, despite your best efforts, you might need to call in the cavalry. Here’s when to reach out to JLab support:
Persistent Connectivity Issues: If your earbuds refuse to connect to any device even after multiple reset attempts, it’s time for expert intervention.
Recurring Audio Problems: Audio glitches that survive a reset and firmware updates are a sign of deeper issues that likely require professional attention.
Physical Damage: If you notice any physical damage to your earbuds or charging case that might be causing the problem, JLab support can advise on repair or replacement options.
If You’ve Tried Everything: Sometimes, you just hit a wall. If you’ve followed all the troubleshooting steps and still no joy, JLab’s customer support team can provide further guidance and support.
Maintaining Your JLab Earbuds
Taking good care of your JLab earbuds isn’t just about keeping them clean; it’s about ensuring they’re always ready for your next workout, work call, or relaxation session. Here are some tips to help you keep your earbuds sounding great and functioning reliably.
Tips for Preventing Future Issues
Regular Charging: Make it a habit to charge your earbuds and their case regularly. But avoid leaving them plugged in for too long; overcharging can wear out the battery over time. A good practice is to charge them when you’re not using them and ensure they’re fully charged before you head out.
Proper Storage: When you’re not using your earbuds, keep them in their case. Not only does this keep them charged, but it also protects them from dust, moisture, and accidental drops. Avoid extreme temperatures and direct sunlight, as these can damage the earbuds and battery.
Keep Firmware Updated: Regularly check for firmware updates. These updates can fix bugs, improve performance, and even add new features to your earbuds.
How to Properly Clean and Care for Your Earbuds
Keeping your JLab earbuds clean is crucial for their longevity and your ear health. Here’s how to do it properly:
Use a Soft, Dry Cloth: Gently wipe down the earbuds and the charging case with a soft, dry cloth. This removes any dust and earwax that might have accumulated. Avoid using water or any wet cleaning agents, as moisture can damage the electronics.
Ear Tips: If your earbuds have removable silicone ear tips, take them off and clean them separately. You can wash these tips with mild soap and water, but make sure they are completely dry before reattaching them to the earbuds.
No Sharp Objects: Never use sharp objects to clean your earbuds. This can cause damage to the delicate components. If you need to remove stubborn debris, gently use a soft-bristled brush.
Regular Checks: Make it a routine to check your earbuds for any signs of wear or damage. Catching issues early can prevent them from turning into bigger problems.
Conclusion
We hope this guide on how to reset JLab headphones has been super helpful for you. Getting your earbuds working right shouldn’t be a headache, and with these steps, you can get back to enjoying your favorite tunes and chats in no time.
But wait, there’s more! Our website is packed with more reviews and how-to guides on all sorts of speakers, headphones, and anything else related to music and sound. We’ve got everything you need to make your listening experience the best it can be, whether you’re all about music, podcasts, or everything in between.
Thanks for sticking with us, and don’t forget to check out our site for more handy tips and tricks. Happy listening!
Monica Rivas is a Reviewer and Content Manager of Audiofavorite, she is an audiophile for many years and she helps people to learn all they need about audio, speakers, sound etc.